November 2017

The ever increasing use of composites in more and more demanding environments has meant the need for improved performance from all composite materials. A definite need for high performance epoxy systems for use at high temperatures has always been a requirement and now we are delighted to offer a hardener that will provide higher thermal properties than our existing range.

PRO-SET High Tg Laminating and Infusion Hardeners

With the use of composites become more wide spread there is a need for epoxies that are stable at high temperatures. We have therefore developed two new PRO-SET high temperature hardeners for use with our standard PRO-SET Laminating and Infusion epoxy resins. These cured systems are able to resist much higher temperature and are ideal for use in application where high temperature resistance is required.

PRO-SET LAM-249-HT HIGH TEMPERATURE Hardener

• When used with PRO-SET LAM-125 Resin, DSC onset Tg’s of 121°C are achievable.

• When used with PRO-SET LAM-135 Resin, DSC onset Tg’s of 128°C are achievable.

PRO-SET INF-249-HT HIGH TEMPERATURE Hardener

• When used with PRO-SET INF-114 resin, DSC onset Tg’s of 117°C are achievable.

These systems have been added to our standard product range are readily available from stock.

For further information please see http://westsysteminternational.com/en/pro-set/pro-set-epoxies or e-mail [email protected]

 PRO-SET® composite products include a specialist range of epoxy systems from infusion epoxies and wet lay-up systems to adhesives, accessories and fairing compounds.

PRO-SET products are used for building high-performance, lightweight composite structures that can withstand the harshest environments. From automotive parts to wind turbine blades to hi-tech hulls, PRO-SET epoxy can enhance the strength and durability of practically any composite component.

t: 023 9252 2044
e: [email protected]
w: marineadagency.com

WSI announces NEW PRO-SET High Temperature Hardeners.

November 2017

The ever increasing use of composites in more and more demanding environments has meant the need for improved performance from all composite materials. A definite need for high performance epoxy systems for use at high temperatures has always been a requirement and now we are delighted to offer a hardener that will provide higher thermal properties than our existing range.

PRO-SET High Tg Laminating and Infusion Hardeners

With the use of composites become more wide spread there is a need for epoxies that are stable at high temperatures. We have therefore developed two new PRO-SET high temperature hardeners for use with our standard PRO-SET Laminating and Infusion epoxy resins. These cured systems are able to resist much higher temperature and are ideal for use in application where high temperature resistance is required.

PRO-SET LAM-249-HT HIGH TEMPERATURE Hardener

• When used with PRO-SET LAM-125 Resin, DSC onset Tg’s of 121°C are achievable.

• When used with PRO-SET LAM-135 Resin, DSC onset Tg’s of 128°C are achievable.

PRO-SET INF-249-HT HIGH TEMPERATURE Hardener

• When used with PRO-SET INF-114 resin, DSC onset Tg’s of 117°C are achievable.

These systems have been added to our standard product range are readily available from stock.

For further information please see http://westsysteminternational.com/en/pro-set/pro-set-epoxies or e-mail [email protected]

Notes for editors

PRO-SET® composite products include a specialist range of epoxy systems from infusion epoxies and wet lay-up systems to adhesives, accessories and fairing compounds.

PRO-SET products are used for building high-performance, lightweight composite structures that can withstand the harshest environments. From automotive parts to wind turbine blades to hi-tech hulls, PRO-SET epoxy can enhance the strength and durability of practically any composite component.

 t: 023 9252 2044

Presented by Cathy McLeanhttp://www.bymnews

BYM where the news is read.

1.5 Million News items opened Jan. 1- Apr. 30 2017

Our readership http://www.bymnews.com/pdf/january-june-2017-statistics.pdf

Two for the price of one a place on one of our 3 carousels plus a PDF in BYM magazine, embedded images included Just $42.50 PCM

Detailshttp://www.bymnews

Last Updated ( Monday, 13 November 2017 )